□
[Printing thickener] [Dyestuff] [Auxiliary]

  SEATEX SH800
 

  POLYESTER
  PRINTING THICKENER
 

is a Discharge and Direct printing thickener for polyester.

  PRODUCT PROPERTIES

■ APPEARANCE
■ MOISTURE (ISO 1666)
■ SOLUBILITY
■ PURITY
■ STOCK SOLUTION CONC.
■ VISCOSITY (8 % Solution: at 20rpm)
■ pH VALUE
■ pH Range
■ IONIC NATURE
■ FLUIDITY
■ SHEAR RATE

Lt.brownish Powder
About 10%
Soluble in cold water
High purity
8 %
35,000
7±0.5
5 ~ 10
Non-ionic
Middle
Low
 

  PRODUCT CHARACTER

 

■ High color yield
■ Good viscosity stability against Stannous Chloride
■ Good penetration
■ Excellent levelness
■ Excellent wash-off property comparing normal Tamarind product
■ Good compatibility against every chemical relating printing
 

  PRODUCT APPLICATION

■ SEATEX SH800 can be applied to auto-screen and Padding machine
■ SEATEXSH800 can be applied to mixing with Alginate for special purpose
■ Preparation of stock paste:

■ Put SEATEX SH800 into water, stir with high-speed stirrer until the viscosity rises to a stable state. Lay the stock paste aside for several hours, let it dilate completely. Stir for a while and then the stock paste is ready for using.
 

  PRODUCT PACKING
 

■ Multiple paper bag with polyethylene bags inside. 25KGS net, and
available on one-way pallets.
 

  PRODUCT STORAGE

■ Store under dry condition in well-sealed packages.

Viscosity measured by Brook Field DVE Type at 6RPM by #6 spindle.