[Printing thickener] [Dyestuff] [Auxiliary]

 

 

Polyester

 

  SEATEX  PD
 

  POLYESTER
  RINTING THICKENER
  (Padding : Ground Printing   in Discharge--Printing)

 

is a medium viscos printing thickener for direct/discharge printing on polyester.. And especially developed for ground printing with high color yield in Discharge printing.

  PRODUCT PROPERTIES

 

 

 

 

■ APPEARANCE Lt.
■ MOISTURE (ISO 1666)
■ SOLUBILITY
■ PURITY
■ STOCK SOLUTION CONC.
■VISCOSITY (10 % Solution: at 20rpm)
■ pH VALUE
■ pH Range
■ IONIC NATURE
■ FLUIDITY
■ SHEAR RATE
 

brownish Powder
About 10%
Soluble in cold water
High purity
10 %
32,000
7±0.5
5 ~ 10
Non-ionic
Middle
Low

  PRODUCT CHARACTER
 

 

■ High color yield
■ Good viscosity stability
■ Good penetration.
■ Excellent levelness
■ Excellent wash-off property comparing normal Tamarind product
■ Good compatibility against every chemical relating printing
 

  PRODUCT APPLICATION

 

 

 

 

 

■ SEATEX PD can be applied to auto-screen and rotary printing.
■ SEATEX PD dissolves fast in cold water, and no dust or lump produced while using high shear equipment.
■ Preparation of stock paste:

SEATEX PD
Water

10 KGS
90 KGS

Stock Paste

100 KGS

■ Put SEATEX PD into water, stir with high-speed stirrer until the viscosity rises to a stable state. Lay the stock paste aside for several hours, let it dilate completely. Stir for a while and then the stock paste is ready for using.
 

  PRODUCT PACKING
 

■ Multiple paper bag with polyethylene bags inside. 25KGS net, and available on one-way pallets.
 

  PRODUCT STORAGE



 

 

 

 

 

 

 

■ Store under dry condition in well-sealed packages.

 

 

Copyright ⓒ 2002 Ungjin corporation. All rights reserved.