□
[Printing thickener] [Dyestuff] [Auxiliary]

  SEATEX P9N
 

  POLYESTER
  PRINTING THICKENER
 

is specially improved printing thickener of Seatex P9 in color yield(by 30%higher than Seatex P9) for direct/discharge printing on polyester.. And especially developed for good penetration great color yield. This can be used for both of screen/rotary printing.
 

  PRODUCT PROPERTIES

■ APPEARANCE Lt.
■ MOISTURE (ISO 1666)
■ SOLUBILITY
■ PURITY
■ STOCK SOLUTION CONC.
■ VISCOSITY (10 % Solution: at 20rpm)
■ pH VALUE
■ pH Range
■ IONIC NATURE
■ FLUIDITY
■ SHEAR RATE

brownish Powder
About 10%
Soluble in cold water
High purity
10 %
45,000±3,000
7±0.5
5 ~ 10
Non-ionic
Middle
Low
 

  PRODUCT CHARACTER

 

■ High color yield(over 50% higher than Sodium Alginate)
■ Good viscosity stability
■ Good penetration.
■ Excellent levelness
■ Excellent wash-off property comparing normal Tamarind product
■ Good compatibility against every chemical relating printing
 

  PRODUCT APPLICATION

SEATEX P9N can be applied to auto-screen and rotary printing.
■ SEATEX P9N dissolves fast in cold water, and no dust or lump produced while using high shear equipment.
■ Preparation of stock paste:

■ Put SEATEX P9Ninto water, stir with high-speed stirrer until the viscosity rises to a stable state. Lay the stock paste aside for several hours, let it dilate completely. Stir for a while and then the stock paste is ready for using.

  PRODUCT PACKING

■ Multiple paper bag with polyethylene bags inside. 25KGS net, and available on one-way pallets.

  PRODUCT STORAGE

■ Store under dry condition in well-sealed packages.