¡à
[Printing thickener] [Dyestuff] [Auxiliary]

 

 

Polyester

 

  SEATEX P9
 

  POLYESTER
  PRINTING THICKENER

is a medium viscos printing thickener for direct/discharge printing on polyester. And especially developed for good penetration and great color yield. This can be used for both of screen/rotary printing.
 

  PRODUCT PROPERTIES

 

 

 

 

¡á APPEARANCE Lt.
¡á MOISTURE (ISO 1666)
¡á SOLUBILITY
¡á PURITY
¡á STOCK SOLUTION CONC.
¡á VISCOSITY (10 % Solution: at 20rpm)
¡á pH VALUE
¡á pH Range
¡á IONIC NATURE
¡á FLUIDITY
¡á SHEAR RATE

brownish Powder
About 10%
Soluble in cold water
High purity
10 %
45,000
7±0.5
5 ~ 10
Non-ionic
Middle
Low
 

  PRODUCT CHARACTER
 

 

 

¡á High color yield
¡á Good viscosity stability
¡á Good penetration.
¡á Excellent levelness
¡á Excellent wash-off property comparing normal Tamarind product
¡á Good compatibility against every chemical relating printing

  PRODUCT APPLICATION


 
 

 

 

 

¡á SEATEX P9 can be applied to auto-screen and rotary printing.
¡á SEATEX P9 dissolves fast in cold water, and no dust or lump produced while using high shear equipment.
¡á Preparation of stock paste:

SEATEX P9
Water

10 KGS
90 KGS

Stock Paste

100 KGS

¡á Put SEATEX P9 into water, stir with high-speed stirrer until the viscosity rises to a stable state. Lay the stock paste aside for several hours, let it dilate completely. Stir for a while and then the stock paste is ready for using.
 

  PRODUCT PACKING

¡á Multiple paper bag with polyethylene bags inside. 25KGS net, and available on one-way pallets.
 

  PRODUCT STORAGE 

 

 

 

 

 

 

 

 

 

¡á Store under dry condition in well-sealed packages.

 

 

Copyright ¨Ï 2002 Ungjin corporation. All rights reserved.