POLYESTER
PRINTING THICKENER
|
is a Low viscos printing thickener for direct/discharge printing on Polyester.
And especially developed for good penetration, great color yield. This
can be used for both of screen/rotary printing.
|
PRODUCT PROPERTIES
|
¡á APPEARANCE Lt.
¡á MOISTURE (ISO 1666)
¡á SOLUBILITY
¡á PURITY
¡á STOCK SOLUTION CONC.
¡á VISCOSITY (10 % Solution: at 20rpm)
¡á pH VALUE
¡á pH Range
¡á IONIC NATURE
¡á FLUIDITY
¡á SHEAR RATE
|
brownish Powder
About 10%
Soluble in cold water
High purity
10 %
25,000
7±0.5
5 ~ 10
Non-ionic
Middle
Low
|
PRODUCT CHARACTER
|
¡á High color yield and long Fludity
¡á Good viscosity stability
¡á Good penetration.
¡á High solid content product. Levelness is so excellent
¡á Excellent wash-off property comparing normal Tamarind product
¡á Good compatibility against every chemical relating printing
|
PRODUCT APPLICATION
|
SEATEX MTC800 can be applied to auto-screen and rotary printing.
¡á SEATEX MTC800 dissolves fast in cold water, and no dust or lump produced
while using high shear equipment.
¡á Preparation of stock paste:
SEATEX MTC800
Water
|
10 KGS 90 KGS
|
Stock Paste
|
100 KGS
|
¡á Put SEATEX MTC 800 into water, stir with high-speed stirrer until the
viscosity rises to a stable state. Lay the stock paste aside for several
hours, let it dilate completely. Stir for a while and then the stock paste
is ready for using.
|
PRODUCT PACKING
|
¡á Multiple paper bag with polyethylene bags inside. 25KGS net, and available
on one-way pallets.
|
PRODUCT STORAGE
|
¡á Store under dry condition in well-sealed packages.
Viscosity measured by Brook Field DVE Type at 6RPM by #6 spindle
|