¡à
[Printing thickener] [Dyestuff] [Auxiliary]

 

 

Polyester

 

  SEATEX MDC
 

  POLYESTER
  PRINTING THICKENER
  (Discharge printing)
 

is a Discharge printing thickener for polyester.
And especially stable against Stannous Chloride.

  PRODUCT PROPERTIES

 

 

 

¡á APPEARANCE Lt.
¡á MOISTURE (ISO 1666)
¡á SOLUBILITY
¡á PURITY
¡á STOCK SOLUTION CONC.
¡á VISCOSITY (10 % Solution: at 20rpm)
¡á pH VALUE
¡á pH Range
¡á IONIC NATURE
¡á FLUIDITY
¡á SHEAR RATE

brownish Powder
About 10%
Soluble in cold water
High purity
10 %
23,000±3,000
7±0.5
5 ~ 10
Non-ionic
Long
Low
 

  PRODUCT CHARACTER
 

 

¡á Long Fluidity
¡á Good viscosity stability against Stannous Chloride
¡á Excellent sharpness after discharge
¡á Excellent levelness
¡á Excellent wash-off property comparing normal Tamarind product
¡á Good compatibility against every chemical relating printing
 

  PRODUCT APPLICATION

 

 

 

 

 

¡á SEATEX MDC can be applied to auto-screen and Padding machine
¡á SEATEX MDC can be applied white/colored discharge printing
(especially for Poly Velvet, thick fabric Discharge printing)
¡á Preparation of stock paste:

Seatex M DC
Water

10 KGS
90 KGS

Stock Paste

100 KGS

¡á Put SEATEX MDC into water, stir with high-speed stirrer until the viscosity rises to a stable state. Lay the stock paste aside for several hours, let it dilate completely. Stir for a while and then the stock paste is ready for using.
 

  PRODUCT PACKING
 

¡á Multiple paper bag with polyethylene bags inside. 25KGS net, and
available on one-way pallets.
 

  PRODUCT STORAGE

 

 

 

 

 

 

 

 

¡á Store under dry condition in well-sealed packages.

Viscosity change after mixing with Stannous Chloride
(Brook field at 20 RPM by #6 spindle)

 

Copyright ¨Ï 2002 Ungjin corporation. All rights reserved.