POLYESTER
PRINTING THICKENER |
SEATEX HB is a medium viscos printing thickener for direct printing on
polyester. It is modified sodium alginate.
|
PRODUCT PROPERTIES
|
¡á APPEARANCE
¡á MOISTURE (ISO 1666)
¡á SOLUBILITY
¡á PURITY
¡á STOCK SOLUTION CONC. ¡á VISCOSITY (6% Solution: at 20rpm) ¡á
pH VALUE
¡á pH Range
¡á IONIC NATURE ¡á FLUIDITY
¡á SHEAR RATE
|
Brownish Powder
About 12%
Soluble in cold water
High purity
6%
35,000
7±0.5
5 ~ 10
Non-ionic
Long
Low
|
PRODUCT CHARACTER
|
¡á High color yield (30% higher than normal sodium alginate)
¡á Good viscosity stability
¡á Good fluidity and spinability
¡á Excellent levelness
¡á Excellent wash-off property
¡á Good compatibility against every chemical relating printing
|
PRODUCT APPLICATION
|
¡á SEATEX HB can be applied to auto-screen and rotary printing.
¡á SEATEX HB dissolves fast in cold water, and no dust or lump produced
while using high shear equipment.
¡áPreparation of stock paste:
SEATEX HB
Water |
6 KGS
94 KGS |
Stock Paste |
100 KGS |
¡á Put SEATEX HB into water, stir with high-speed stirrer until the viscosity
rises to a stable state. Lay the stock paste aside for several hours,
let it dilate completely. Stir for a while and then the stock paste is
ready for using.
|
PRODUCT PACKING
|
¡á Multiple paper bag with polyethylene bags inside. 25KGS net, and available
on one-way pallets.
|
PRODUCT STORAGE
|
¡á Store under dry condition in well-sealed packages.
|