□
[Printing thickener] [Dyestuff] [Auxiliary]

  SEATEX GP10
 

  ACRYLIC(PILE / PLAIN)
  PRINTING THICKENER

SEATEX GP10 is a Guar based printing thickener in Direct/Discharge Printing for ACRYLIC(Pile and Plain fabric)
 

  PRODUCT PROPERTIES

■ APPEARANCE
■ MOISTURE (ISO 1666)
■ SOLUBILITY
■ PURITY
■ STOCK SOLUTION CONC.
■ VISCOSITY (9 % Solution: at 20rpm)
■ pH VALUE
■ pH Range
■ IONIC NATURE
■ FLUIDITY
■ SHEAR RATE

Brownish Powder
About 10%
Soluble in cold water
High purity
9%
35,000
7±0.5
5 ~ 10
Non-ionic
Long Fludity
Low
 

  PRODUCT CHARACTER
 

■ High purity
■ Good viscosity stability
■ Good sharpness on the pile fabric.
■ Excellent levelness
■ Excellent wash-off property comparing normal Tamarind product
■ Good compatibility against every chemical relating printing
 

  PRODUCT APPLICATION

■ SEATEX GP10 can be applied to auto-screen and Padding machine
■ SEATEX GP10 can be applied to mixing with Alginate for special purpose
■ Preparation of stock paste:

■ Put SEATEX GP10 into water, stir with high-speed stirrer until the viscosity rises to a stable state. Lay the stock paste aside for several hours, let it dilate completely. Stir for a while and then the stock paste is ready for using.
 

  PRODUCT PACKING
 

■ Multiple paper bag with polyethylene bags inside. 25KGS net, and
available on one-way pallets.
 

  PRODUCT STORAGE

■ Store under dry condition in well-sealed packages

.

Viscosity measured by Brook Field DVE Type at 6RPM by #6 spindle.